UPCOMING EVENTS
ADC Meet and Greet
When: Tuesday, August 6, 2-3 PM PDT
Where: The ADC booth (booth 207)
Who: Leaders from the National Center for Science and Engineering Statistics (NCSES) who are involved in spearheading ADC’s efforts.
Click here to register for the conference.
PAST EVENTS
On July 15, 2024, a Teaming Speed Networking Event was held. This event aimed to help organizations find potential partners for the Measuring Sexual Harassment in the Science Technology Education and Mathematics (STEM) Enterprise (RFS Identifier: MSH-24). Request for Solutions. During the event, organizations highlighted their capabilities and specifics behind their teaming goals.
To view the presentation and attendee contact list:
The submission deadline for the project is July 29, 2024, at 3 PM ET. Membership in ADC is not required for submission. However, if chosen, the selected organization must join ADC.
A webinar was held on July 12 at 2 PM ET to review the topic, RFS submission requirements, and provide the opportunity for attendees to ask questions. The slides and recording from this webinar can be found below.
WATCH THE WEBINAR
*Note: the passcode for this video is 8nNHMm%9L9
On June 27, 2024, ATI published two Request for Solutions (RFS):
-Artificial Intelligence for Enhancing Data Quality, Standardization, and Integration for Federal Statistics
-AI-Ready Data Products to Facilitate Discovery and Use
The submission deadline for the project is July 25, 2024, at 3 PM ET. Membership in ADC is not required for submission. However, if chosen, the selected organization must join ADC.
A webinar was held on July 1 at 1 PM ET to review the topic, RFS submission requirements, and provide the opportunity for attendees to ask questions. The slides and recording from this webinar can be found below.
*Note: the passcode for this video is 4ii.51?B*P
On July 2, 2024, a Teaming Speed Networking Event was held. This event aimed to help organizations find potential partners for two topics:
-Artificial Intelligence for Enhancing Data Quality, Standardization, and Integration for Federal Statistics
-AI-Ready Data Products to Facilitate Discovery and Use Request for Solutions.
During the event, organizations highlighted their capabilities and specifics behind their teaming goals.
To view the presentation and attendee contact list:
On June 18, 2024, ATI published the following Request for Solutions (RFS): Synthetic Data Generation with Large, Real-World Data.
The submission deadline for the project is July 16, 2024, at 3 PM ET. Membership in ADC is not required for submission. However, if chosen, the selected organization must join ADC.
A webinar was held on June 24 at 1 PM ET to review the topic, RFS submission requirements, and provide the opportunity for attendees to ask questions. The slides and recording from this webinar can be found below.
*Note: the passcode for this video is 1e=V+ZT=Ym
On June 25, 2024, a Teaming Speed Networking Event was held. This event aimed to help organizations find potential partners for the Synthetic Data Generation with Large, Real-World Data (DG-RWD-24) Request for Solutions. During the event, organizations highlighted their capabilities and specifics behind their teaming goals.
To view the presentation and attendee contact list:
On June 12, 2024, ATI published the following Request for Solutions (RFS): Engaging Policy Stakeholders to Inform a Future National Secure Data Service.
The submission deadline for the project is July 10, 2024, at 3 PM ET. Membership in ADC is not required for submission. However, if chosen, the selected organization must join ADC.
A webinar was held on June 20 at 11 AM ET to review the topic, RFS submission requirements, and provide the opportunity for attendees to ask questions. The slides and recording from this webinar can be found below.
*Note: the passcode for this video is f5RLQtyB.a
On June 21, 2024, a Teaming Speed Networking Event was held. This event aimed to help organizations find potential partners for the Engaging Policy Stakeholders to Inform a Future National Secure Data Service (EPS-24) Request for Solutions. During the event, organizations highlighted their capabilities and specifics behind their teaming goals.
To view the presentation and attendee contact list:
On June 11, 2024, ATI published the following Request for Solutions (RFS): Data Integration to Estimate Science, Technology, Engineering and Mathematics (STEM) Attrition and Workforce Supply: A Pilot Approach.
The submission deadline for the project is July 2, 2024, at 3 PM ET. Membership in ADC is not required for submission. However, if chosen, the selected organization must join ADC.
A webinar was held on June 17 at 2 PM ET to review the topic, RFS submission requirements, and provide the opportunity for attendees to ask questions. The slides and recording from this webinar can be found below.
*Note: the passcode for this video is 54uY64Jr!m
On June 17, 2024, a Teaming Speed Networking Event was held. This event aimed to help organizations find potential partners for the Data Integration to Estimate Science, Technology, Engineering and Mathematics (STEM) Attrition and Workforce Supply: A Pilot Approach (STEM-24) Request for Solutions. During the event, organizations highlighted their capabilities and specifics behind their teaming goals.
To view the presentation and attendee contact list:
On May 9, 2024, ATI published the following Request for Solution (RFS): Building Capacity for State, Local, and Territorial Governments to Use Administrative Data for Evidence-Building (ADEB-24).
The submission deadline for the project is May 30, 2024, at 3PM ET. Membership in ADC is not required for submission. However, if chosen, the selected organization must join ADC.
A webinar was held on May 13 at 1PM ET to review the topic, RFS submission requirements, and provide the opportunity for attendees to ask questions. The slides and recording from this webinar can be found below.
*Note: the passcode for this video is ?qGyiBd5r0
On May 14, 2024, a Teaming Speed Networking Event was held. This event aimed to help organizations find potential partners for the Building Capacity for State, Local, and Territorial Governments to Use Administrative Data for Evidence-Building (ADEB-24) Request for Solutions. During the event, organizations highlighted their capabilities and specifics behind their teaming goals.
To view the presentation and attendee contact list:
On April 19, 2024, ATI published the following Request for Solution (RFS): Data Access Alternatives: Artificial Intelligence Supported Interfaces (DAA-24).
The submission deadline for the project is May 10, 2024, at 3PM ET. Membership in ADC is not required for submission. However, if chosen, the selected organization must join ADC.
A webinar was held on April 22 at 3PM ET to review the topic, RFS submission requirements, and provide the opportunity for attendees to ask questions. The slides and recording from this webinar can be found below.
*Note: the passcode for this video is TAjPU*^G?8
On April 23, 2024, a Teaming Speed Networking Event was held. This event aimed to help organizations find potential partners for the Data Access Alternatives: Artificial Intelligence Supported Interfaces (DAA-24) Request for Solutions. During the event, organizations highlighted their capabilities and specifics behind their teaming goals.
To view the presentation and attendee contact list:
The America’s DataHub Consortium hosted a virtual Idea Bank Workshop on March 26, 2024. This participatory workshop provided an overview of the Idea Bank submissions that we have received. Subject matter experts, members of the ADC and any interested person were welcome to participate in the breakout sessions. Possible future project opportunities were explored based on the following topics:
- Artificial Intelligence (AI): Incorporating AI in data collection, access, linkage, and standards.
- Data Standardization: Establishing Government-wide standardization of metadata, data schemas, and technical documentation.
- Data Access: Overcoming challenges to data sharing to improve access.
On February 12, 2024, ATI published the following Request for Solution (RFS): Informing Evidence-Building Capacity among State, Local, Territorial, and Tribal Governments within a National Secure Data Service.
The submission deadline for the project was March 18, 2024, at 3PM ET. Membership in ADC is not required for submission. However, if chosen, the selected organization must join ADC.
A webinar was held on February 15 at 3PM ET to review the Informing Evidence-Building Capacity topic, RFS submission requirements, and provide the opportunity for attendees to ask questions. The slides and recording from this webinar can be found below.
Informing Evidence-Building Capacity among State, Local, Territorial, and Tribal Governments within a National Secure Data Service
The objective of this project is to explore how a potential, future National Secure Data Service (NSDS) could support capacity building for research and data science among state, local, territorial, and tribal governments.
*Note: the passcode for this video is aR7*VUQDt7
On February 16, 2024, a Teaming Speed Networking Event was held. This event aimed to help organizations find potential partners for the the Informing Evidence-Building Capacity among State, Local, Territorial, and Tribal Governments within a National Secure Data Service RFS. During the event, organizations highlighted their capabilities and specifics behind their teaming goals.
To view the presentation:
On February 13, 2024, a Teaming Speed Networking Event was held. This event aimed to help organizations find potential partners for the Secure Compute Environment Testbed for a National Secure Data Service RFS. During the event, organizations highlighted their capabilities and specifics behind their teaming goals.
To view the presentation:
On February 7, 2024, ATI published the following Request for Solution (RFS): Secure Compute Environment Testbed for a National Secure Data Service.
The submission deadline for the project was February 28, 2024, at 3PM ET. The Government anticipates there will be a single award for each project. Membership in ADC is not required for submission. However, if chosen, the selected organization must join ADC.
A webinar was held on February 12 to review the Secure Compute Environment Testbed topic, RFS submission requirements, and provided the opportunity for attendees to ask questions. The recording of the webinar and slides can be found below.
Secure Compute Environment Testbed for a National Secure Data Service
The objective of this project is to design and build a secure compute environment testbed that will be leveraged as part of an overall effort to test linkage and access infrastructure to support the National Secure Data Service Demonstration (NSDS-D) project.
*Note: the passcode for this video is PDdz*T+5uY
On December 13th, 2023, a Networking Webinar was held for ADC members, Government, and other organizations interested in learning more about the ADC member capabilities that can be leveraged in future proposals. ADC teambuilding opportunities were also presented.
As the federal sponsors for the ADC, Dr. May Aydin kicked off the webinar with a brief overview of how the National Center for Science and Engineering Statistics within the National Science Foundation is utilizing the ADC to support initiatives within NCSES, NSF and across the federal data ecosystem. ATI also reviewed lessons learned from past solicitations and resources available to members to support teambuilding.
To view the presentation and watch the recording:
On July 24th, 2023, ATI published the following Request for Solution (RFS): Secure Compute Environment Environmental Scan (SCE).
The submission deadline for the project was August 14th, 2023 at 3PM ET. Membership in ADC is not required for submission. However, if chosen, the selected organization must join ADC.
A webinar was held on July 27th at 3PM ET to review the Secure Compute Environment Environmental Scan topic, RFS submission requirements, and provide the opportunity for attendees to ask questions.
On July 10, 2023, ATI published two (2) Requests for Solutions (RFS) on the Opportunities section of the America’s DataHub Consortium (ADC) website:
- Creation of Synthetic Data for the Annual Business Survey (ABS) and Use of Verification Metrics and
- Models for a Data Concierge Service for a National Secure Data Service
The submission deadline for both projects was Monday, July 31st, 2023 at 3PM ET. Membership in ADC is not required for submission. However, if chosen, the selected organization must join ADC.
A webinar was held on July 13th, 2023 at 3PM ET to review the topic, RFS submission requirements, and provide the opportunity for attendees to ask questions.
On June 26, 2023, ATI published the following Request for Solution (RFS): Evaluation of Noise Infusion for the Survey of Doctorate Recipients (SDRN).
The submission deadline for the project was July 17, 2023 at 3PM ET. Membership in ADC is not required for submission. However, if chosen, the selected organization must join ADC.
A webinar was held on June 28th at 11AM ET to review the Evaluation of Noise Infusion for the Survey of Doctorate Recipients (SDRN) topic, RFS submission requirements, and provide the opportunity for attendees to ask questions.
On June 21, 2023, ATI published the following Request for Solution (RFS): Creation of Synthetic Data for the Survey of Earned Doctorates and Development and Use of Verification Metrics (SEDSyn)
The submission deadline for the project was July 12, 2023 3PM ET. Membership in ADC is not required for submission. However, if chosen, the selected organization must join ADC.
A webinar was held on June 26th at 11AM ET to review the SEDSyn, PPRL1, and PPRL2 topics, RFS submission requirements, and provide the opportunity for attendees to ask questions.
On June 14, 2023, ATI published a Request for Solution (RFS): National Center for Health Statistics: National Vital Statistics System Modernization—New Opportunities for Interoperable Data. The Government is seeking new opportunities for the use of interoperable health data to support timely research and public health surveillance. Insights from this project will help to modernize health data interoperability that can inform best practices for a possible, future National Secure Data Service (NSDS) and the broader data and evidence ecosystem.
The submission deadline for the RFS was July 6, 2023, at 3:00 p.m. ET. Membership in ADC is not required for submission. However, if chosen, the selected organization must join ADC.
A webinar was held on June 22nd at 10AM ET to review both topics, RFS submission requirements, and provide the opportunity for attendees to ask questions.
On June 20, 2023, ATI published the following Request for Solutions (RFS): Development of a Prototype for the Standard Application Process (SAP) Portal and the Data Usage Platform as a Federal Data Asset Synopsis.
The submission deadline for the project was July 11, 2023 3PM ET. The Government anticipates there will be one or more award for each project. Membership in ADC is not required for submission. However, if chosen, the selected organization must join ADC.
A webinar was held on June 21st at 11AM ET to review both topics, RFS submission requirements, and provide the opportunity for attendees to ask questions.
On April 25, 2023, ATI published two (2) Request for Solutions (RFS): the Privacy Preserving Technology (PPT) Phase 1 – Environmental Scan project and the Data Protection Toolkit (DPT) Use Case Analysis.
A webinar was held on Friday, 4/28 to review both the PPT and DPT topics, review RFS submission requirements for each, and provided the opportunity for attendees to ask questions.
Washington Convention Center, Washington D.C.
The FBSE project performers spoke as part of a panel discussion at this event.
Marriott Marquis – Liberty Salons MNOP (Convention Center) Washington, DC
This was for ATI Consortia Members only.
Gaylord National Convention Center and Hotel, National Harbor
